How to connect with power

The input power can be DC / AC 7-48V . You can connect with garage control system and lights.

How to add RF remote
1. There are two working modes for this switch. You need to select one mode before pairing with remotes:

1.1 Momentary mode : Connect the jumper cap with M on the board.
It works like this : Press and hold A button, 1st channel work, release A button, 1st channel stop. B button and 2nd channel work same
1.2 Toggle mode : Connect the jumper cap with T on the board.
It works like this : Press A button, 1st channel work, press A button again, 1st channel stop. B button and 2nd channel work same
2. After connect with T or M, press learning button 1 once ;
3.Press A button once, succeed. A button can control 1st channel ;
4.Press leanring button 2 once, press B button once, succeed. B button can control 2nd channel.